PRODUCTS & CHOOSING
Q: Which is right for the boat — bow-mount or transom-mount?
A: A bow-mount fits the front deck and pulls the boat, giving more precise steering and better control in wind and current. It frees both hands, since steering is by remote or foot control, and suits most fishing boats.
A transom-mount clamps to the back like a small outboard. It is simpler to fit, needs no drilling, and is easy to move between boats. Steering is by tiller handle, which keeps one hand occupied — a good choice for smaller boats, inflatables, and occasional use.
Q: How is the right thrust chosen — 55 lb or 80 lb?
A: Thrust is matched to the boat's fully loaded weight — hull, gear, people, and batteries. A useful starting point is about 2 lb of thrust for every 100 lb of loaded weight.
If the boat is often used in wind, current, or open water, choosing a little more power is wise. An underpowered motor runs at full speed, drains the battery faster, and can lose ground; a slightly larger motor runs more easily and lasts longer.
Q: What shaft length is needed — 48" or 54"?
A: Shaft length depends on the distance from the mounting surface down to the waterline, not on the boat's length. With the boat loaded as it would normally be used, measure that height and allow enough extra length for the propeller to stay well submerged.
Add margin for rough water or a high bow. If the propeller breaks the surface in waves, thrust and steering drop immediately, so when choosing between two sizes the slightly longer shaft is usually the safer option.
Q: What does the GPS series offer?
A: GPS motors hold the boat in position automatically, similar to a virtual anchor. Once locked on, the motor corrects against wind and drift to keep the boat in place, which is helpful for fishing without constant manual steering.
Depending on the model, saved positions, heading hold, and small position adjustments are also available. Because the propeller needs to stay submerged for steady holding, a suitable shaft length is particularly important with GPS models.
Q: What is the difference between tiller, remote, and foot control?
A: Tiller control steers and adjusts speed by hand at the motor. Remote control operates the motor wirelessly from anywhere on the boat. Foot control leaves both hands free, using a pedal for steering and speed.
The best choice comes down to preferred fishing style — tiller is simple and direct, while remote and foot control allow concentration on fishing rather than steering.
Q: Can the motors be used in salt water?
A: The motors are built to resist corrosion and can be used in both fresh and salt water. To extend the life of the motor, rinse it thoroughly with fresh water after every saltwater outing, dry it, and store it in a cool, dry place. Corrosion caused by lack of care is not covered as a defect.
Q: Are spare and after-sales parts sold separately, and how is compatibility confirmed?
A: A range of accessories and after-sales parts — such as remote controls, quick-release mounts, control boards, and steering motors — is available separately. Each parts listing shows the compatible motor models. If the exact model is unclear, contact support with the motor model and serial number before ordering.
REMOTES & COMPATIBILITY
Q: Are all remotes compatible with all motors?
A: No.
There are 3 main remote systems: 433Hz (older) , 2.4G (newer), GPS.
A remote from one system is not compatible with a motor from the other system.
Please check your motor version before ordering a remote or pairing.
Q: Can one remote control operate two or more trolling motors?
A: No. One remote can only be paired with one motor at a time. It cannot control multiple motors simultaneously. If you need to control two motors, you will need two separate remotes — one paired to each motor.
Q: Can two remote controls operate the same trolling motor?
A: Yes. You can pair multiple remotes to the same motor. However, only one remote can be used at a time. If both remotes are powered on and used simultaneously, they will interfere with each other, causing delayed response, erratic steering, or signal dropouts.If you want a spare remote, you can pair a second one and keep it as a backup. Just make sure the unused remote is powered off during operation.
Q: How do I pair a second remote with my motor?
- Make sure the motor is in the vertical (deployed) position(Note: This vertical/deployed position requirement applies only to bow-mount motors. It is not required for transom-mount motors.).
- Press and hold the Reset button (magnifying glass icon) on the motor head.
- Press and hold the Turtle (speed down) button on the new remote.
- Hold both for about 5 seconds until you hear a beeping sound.
- Release the buttons. The new remote is now paired.
BATTERY & POWER
Q: How many batteries are needed, and what voltage?
A: The 55 lb motors run on a 12V system and use one battery. Higher-thrust 24V models use two batteries wired in series. The product specifications for each motor list the exact voltage required, and the motor should always be matched to a battery bank of the same voltage.
Q: What type of battery is recommended?
A: A deep-cycle marine battery is required — either a lead-acid AGM or a lithium LiFePO4 battery. AGM batteries have a lower upfront cost, while lithium batteries are lighter, support more usable capacity, and can be recharged many more times.
A car starting battery should not be used; it is designed for short, high bursts and may damage the motor's electronics or lead to poor run time.
Q: How long will the motor run on a full charge?
A: Run time depends on speed setting, boat weight, wind and current, and battery capacity. Running at lower speeds uses far less power and greatly extends time on the water. The battery's amp-hour (Ah) rating and the motor's current draw at a chosen speed give the best estimate for a specific setup.
ORDERING & PAYMENT
Q: Is an account required to place an order?
A: No. Orders can be checked out as a guest without creating an account. A product account is only used to register products, track warranty, and manage claims — it is separate from checkout and can be created at any time through the Product Portal.
Q: Can an order be changed or cancelled?
A: Orders can usually be changed or cancelled before they ship. Please contact support as soon as possible with the order number. Once an order has shipped, it cannot be edited, but it can be returned after delivery under the 30-day return policy.
SHIPPING & DELIVERY
Q: Where do you ship, and how long does delivery take?
A: We offer free shipping to the 48 contiguous United States. Orders are processed within 1 business day and usually arrive in 2–8 business days, depending on location.
We stock products in warehouses in California and New Jersey. When both locations have the item in stock, the order ships from the warehouse closer to the delivery address; otherwise it ships from whichever warehouse has stock.
Q: Are Hawaii, Alaska, or U.S. territories covered?
A: At this time we are unable to ship to Hawaii, Alaska, or U.S. territories such as Puerto Rico and Guam. This applies even if shipping is offered at an extra cost, as shipping to these areas is significantly more expensive and the risk of lost packages is higher. We apologize for the inconvenience.
Q: What if the package arrives damaged or something is missing?
A: Please inspect the order on arrival and contact us within 48 hours of delivery if anything is damaged or missing. Kindly include photos of the damaged item, photos of the outer packaging, a photo of the shipping label, and let us know which part needs replacement. The correct replacement parts — or a replacement unit if the damage is severe — can then be arranged promptly.
INSTALLATION & USE
Q: Is the motor easy to install at home?
A: Transom-mount motors simply clamp to the back of the boat and need no drilling. Bow-mount motors are secured to the front deck and usually require a small amount of drilling, following the included instructions. A quick-release mount makes the motor easy to remove for transport and storage.
Step-by-step video tutorials are available, and support is happy to help with any installation question.
Q: How should the motor be maintained and stored?
A: After each use — especially in salt water — rinse the motor with fresh water, check the propeller and shaft, and disconnect the battery. For long-term or off-season storage, keep the motor in a cool, dry place away from temperature extremes, remove batteries from remotes, and fully recharge the battery before storage.
Keeping a spare propeller and shear pin on hand is also recommended, as a bent pin can cut a trip short.
WARRANTY, RETURNS & REGISTRATION
Q: How long is the warranty, and what is covered?
A: The electric outboard motor is warranted against defects in materials and workmanship for 2 years from purchase under normal personal, non-commercial use. The remote control, quick-release mount, and foot control are covered for 90 days, whether included in a kit or bought separately.
Coverage applies to the original purchaser only, is not transferable, and requires proof of purchase. Full details, including what is not covered, are in the Returns & Warranty Policy.
Q: Why register a product, and how is it done?
A: Registration keeps the model, order details, and purchase date on file, so support is faster and claims can be started in a few clicks with the information filled in automatically. It also confirms the warranty start date.
Registration is free and takes a few minutes through the Product Portal. It is recommended but not required; support is always available with an order number.
Q: How is a return or warranty claim started?
A: Requests are submitted through the returns and warranty portal, with the order number or registration code, the reason, and photos or a short video. Every request is reviewed within 1 business day. Once approved, an RMA number and shipping instructions are provided. Please do not ship anything without an RMA, as packages sent without one may be refused.
Q: Can electrical after-sales parts be returned?
A: Electrical parts such as control boards and steering motors cannot be returned for non-defect reasons once they have been installed or connected to power. If a part arrives faulty or does not work correctly, it is handled under the warranty process and a replacement is provided.
Q: How long does a refund take?
A: After the returned item is received and inspected, the refund is issued to the original payment method within 7 business days. It may then take additional time for the bank or card provider to process and post the refund.
COMPANY & SUPPORT
Q: How can customer support be reached, and when is a reply expected?
A: Support can be reached through the Contact Us page or by email at service@aquospro.com. Messages are reviewed within 1 business day; requests sent over weekends or holidays may take a little longer.
Q: The sign-in code email did not arrive. What should be done?
A: Please check the spam or junk folder and confirm that the correct email address was entered. The one-time code is sent to that address and remains valid for a short time. If it still cannot be found, wait a moment and request a new code, or contact service@aquospro.com for help.